Networking the OSD

From The Neuros Technology Wiki

[edit] Set up your Neuros OSD to your Network

We will begin by ensuring your Neuros OSD and PC are connected correctly. Most users will set up their OSD using a home router (wired or wireless) as follows.

Connect your OSD's LAN port to one of your Home router's LAN ports with a standard Ethernet cable. Unplug and then re-plug your OSD to reboot it. When it finishes booting, bring up the menu and navigate to Settings, then Network. If you do not see a suitable IP address in IP Address, you will need to configure a fixed, static IP address. In this case, press the right arrow and choose Specify a static IP address (advanced). Please consult your Home router's manual for more information on your local settings.